How To Use INCOMPATIBLE PRINT CARTRIDGE Running On HP PRESS Printer Of 123.hp.com/ojpro 3800 Series?

Published: 2020-10-21   Views: 409
Author: HPOfficejet3800
Published in: Laptops

As an 123.hp.com/Officejet pro 3800, once you install a print cartridge, the electric light keeps blinking. This means that the print will not occur and you display the error message "Incompatible print cartridge" on the computer screen. It is advisable to seek HP Officejet pro 3800 printer support number from experts and qualified technicians to troubleshoot incompatible print cartridges.

In addition, you can also try to fix the troublesome condition of incompatible ink cartridges, follow the steps below:

Close the printer cover:

If it is open, close the printer cover.

Determine which problem cartridge is:

Launch the ink cartridge entrance and either remove the cartridge.

Now, you need to close the cartridge access door.

To reinstall faulty cartridges, follow the next step.

Remove, inspect, and resolve the problem cartridge:

Launch the cartridge entrance and wait for a few minutes until the cartridge arrives at the center.

Now, you have to clamp down on the end of the defective cartridge to exit the car.

Replace or replace the cartridge and locate it at the correct location where it is of slight angle. Now press up and push forward until the cartridge is in the correct position. Place it in its slot at a slight angle, and hold down until the cartridge is in position.

Clean the problem cartridge contacts:

Launch the ink cartridge and wait until the cartridge is silent or inactive. Then you have to disconnect all the power cords from the back of the 123.hp.com/Officejet pro 3800.

Now, remove the ink cartridge and place it on a clean paper, keeping the nozzle plate upright.

Then, soak a clean cloth in clean water and then remove any excess water from it.

Be sure to clean only the copper colored contacts.

Here, you need to reinstall the ink cartridge and then close the ink cartridge access door.

Also you need to reinstall the ink cartridge and follow the onscreen instructions.

Insert a new print cartridge:

If the problem is not fixed, you need to insert a new print cartridge. If you do not have a replacement print cartridge, you can print in ink backup mode. Remove the problem cartridge and then print with the remaining cartridge.

If the following instructions do not let you work on your printer or your printer is showing other issues, you will need to contact our customer service at HP Officejet pro 3800 printer helpline number +1-800-673-8163. Here, you will have support under www.123.hp.com/setup the supervision of accomplished professionals who ensure to provide reliable and customized support at your fingertips. Visit for more information- https://123.hpsetup.online/hp-officejet-3800-all-in-one-printer-series.html

Tags-

123.hp.com/ojpro 3800,

123.hp.com/Officejet pro 3800,

HP Officejet pro 3800 printer support number,

HP Officejet pro 3800 printer Drivers,

HP Officejet pro 3800 printer helpline number,

123.hp.com/setup,

www.123.hp.com/setup